- 消泡母粒(除潮母粒、除濕母粒、吸水母粒)適用于各類適用的PE、PP再生塑料制品生產的企業。原材料中含有微量水分對于塑料制品的生產有著非常嚴重的影響，因此企業一般采用增加烘干設備對塑料進項烘干處理，這對于能源和人力都是極大的消費，增加產品的成本。而使用本母粒,只需要將其加入原材料中,無需對產品的生產工藝進行任何調整,都可以消除由于水分引起的氣泡、云紋、裂痕、斑點等-切問題。
- Defoaming masterbatch (dehumidification masterbatch，dehumidification masterbatch，water-absorbing masterbatch) is suitable for all kinds of enterprises producing PE and PP recycled plastic products. The trace amount of moisture in the raw materials has a very serious impact on the production of plastic products. Therefore,enterprises generally use additional drying equipment to dry the plastic input items, which consumes a lot of energy and manpower and increases the cost of products. With this masterbatch, it only needs to be added to the raw materials without any adjustment to the production process of the product, and the cutting problems such as bubbles，moir，cracks，spots，etc. caused by moisture can be eliminated.
- 將本母粒與受潮塑料原料直接混合均勻，即可進行制品加工生產作業。如用于吹塑生產作業,添加呲例為1%-2%,如用于片材及注塑生產作業，添加比例為2%~5%,具體添加比例應根據塑料受潮情況、用戶酌情添加。
- The masterbatch and the damp plastic raw materials are directly mixed evenly and then the product processing and production operations can be carried out. lf it is used in blow molding production operations, the addition ratio of pyridine is 1%-2%. lf it is used in sheet and injection molding production operations, the addition ratio is 2%~5%. The specific addition ratio should be added according to the moisture content of the plastic and the user’s discretion.
- 尼龍真空袋包裝、雙層袋密封包裝、紙塑復合袋包裝，5千克/袋、25千克/箱貨袋,不允許產品長時間接觸空氣避免陽光暴曬，雨淋。
- Nylon vacuum bag packaging, double-layer bag sealing packaging, paper-plastic composite bag packaging, 5kg/bag, 25kg/carton bag, do not allow the product to contact the air for a long time, avoid sun exposure and rain.
- 本母粒使用前避免受潮吸濕;
Avoid moisture absorption of this masterbatch before use; - 使用前依照生產量隨用隨配為佳;
Before use, it is better to use it according to the production volume; - 不得與受潮塑料共同加熱烘干，以免造成生產成品質量存在品質瑕疵；
Do not heat and dry with damp plastics, so as to avoid quality defects in the quality of the finished products; - 打開包裝前檢查包裝是否完好，并將未用完的母粒盡快熱封包裝。
Check whether the package is in good condition before opening the package, and heat-seal the unused masterbatch as soon as possible.
指標 Index
數值 Numerical Value
載體 Carrier
PE/PP
顏色 Colour
白色/灰色/黑色
氧化鈣含量
Calcium Oxide Content
75%-85%
熔融指數 Melt Index
2-20g/10min
吸水率
Water Absorption
≥20%
相容性 Compatibility
PE/PP/PVC/ABS
- 廣泛應用于模制品，袋制品，片材制品及注塑制品。
- Widely used in molded products, bag products, sheet products and injection molding products.
微信咨詢
